← Back to guides

User manual for Red Light MAX panels (MAX 60 and MAX 180)

Before you begin

Check the package. MAX 60 box: panel, power cord, protective goggles, stand. MAX 180 box: panel, power cord, protective goggles, remote control, mounting hardware, pulley system, door hanging kit.
Choose a location. The panel is for indoor, dry use only: do not place it in a bathroom, near water, or outdoors. The cooling fans are on the back, leave space around them.
Secure it firmly.
MAX 60: desktop panel, set it up using the included stand.
MAX 180: you can mount it to the wall with the mounting hardware, hang it on a door with the kit, suspend it with the pulley system, or place it on the separately sold MAX180 Stand. Place the stand on a flat, stable floor and ensure the panel does not wobble before switching it on.
Prepare your skin. It must be clean and dry, without creams or oils.
Check the power supply: the panel operates on 110–240 V AC, 50/60 Hz.

Step by step

Plug the power cord into the connector on the back of the panel and the other end into the wall outlet.
Switch on the main power button on the back of the panel.
Select the light: the RED button turns the red light on/off, the NIR button turns the near-infrared light on/off. You can use both simultaneously.
Set the time.

MAX 180: using the TIME+ and TIME− buttons, between 1–30 minutes. The remote control has the same functions.
MAX 60: no built-in timer, so track the time with a phone timer or a clock.

Put on the protective goggles.
Turn the body area you wish to treat toward the panel (e.g., back, thigh, shoulder) and set the distance (see below).
After use, switch off the panel, unplug it from the outlet, and let it cool down.

Settings and tips

Distance: the panel can be used from 3–60 cm; 15–30 cm is standard for general use. Closer is more intense, further away covers a larger area.
Upper limit: do not exceed 30 minutes on one body area per session. As a beginner, stick to shorter durations.
Never fall asleep in front of the switched-on panel.
Eyes: do not look directly into the light source for long periods, and do not look into the switched-on panel with optical aids (magnifying glass, mirror). If your panel also emits blue light, wearing goggles is mandatory.
Advanced control: if your panel's display has a Dimmer or Pulse menu, adjust the brightness using the slider or the + and − buttons, and select the pulse frequency from the menu. Save your settings using the "Add as Default Mode" button.
Remote control: operates with a 23A 12V battery.

Cleaning, charging, and storage

No charging needed, the panel runs on mains power. If the remote doesn't respond, replace the 23A 12V battery. Do not dispose of dead batteries in household waste; take them to a battery collection point.
Before cleaning, switch off, unplug, and let the panel cool down.
Dust accumulated behind the LEDs should be wiped off once a week with a dry cloth or duster.
Do not polish the metal parts with abrasive cleaners or polishers; use only a dry cloth.
Do not allow liquid to enter the connectors or ventilation openings.
Storage: in a dry, clean, cool place, protected from direct sunlight, between –20 °C and +40 °C. Do not expose to high temperatures or humidity for extended periods. When not in use, unplug from the outlet.

When not to use

Do not use, or only after consulting a doctor if:

there is a cancerous lesion on the area to be treated,
you are taking medication that causes photosensitivity,
you have photosensitive epilepsy,
you have hyperthyroidism (around the neck area),
you have an eye disease (exercise extreme caution),
there is an infection, open wound, or inflammation on the area to be treated,
you have a pacemaker, implant, or other implanted medical device,
you are pregnant or breastfeeding (do not use on the abdomen or lower back area during pregnancy).

Do not use on children under 3 years old. Children may only use it under adult supervision. For dark skin tones, use with caution and for shorter durations; avoid prolonged exposure on tattooed areas, as the pigment may heat up.

Troubleshooting

Does not turn on: check the power cord, the wall outlet, and the main power switch.
Remote control does not respond: replace the 23A 12V battery.
Some LEDs are not lit: do not disassemble the panel, contact us.
Fan is loud or overheating: unplug, let it cool down, and clean the back panel.
Light is flickering: unplug and try again. If the issue persists, service is required.
You smell burning: unplug immediately from the outlet and contact customer service (info@movtech.hu).

Video tutorial

Frequently Asked Questions

What is red light, and what is this product?

The use of red and near-infrared light is referred to in scientific literature as photobiomodulation (PBM). Light of a specific wavelength reaches the tissues, where it is absorbed by the mitochondria that play a role in cellular energy production. PBM is examined in thousands of scientific publications in connection with skin appearance, regeneration, athletic performance, and general well-being.

The MovTech™ Red Light MAX 60 is a desktop-sized red light panel designed for the targeted treatment of individual body areas.

Important: This is a wellness device, not a medical device. It does not diagnose, treat, cure, or prevent any disease, and it is not a substitute for medical care.

What lights does the device use?

The wavelengths of the Red Light MAX 60 are: 630 nm, 660 nm, 810 nm, 830 nm, and 850 nm (5-wavelength design).

the red range (630–660 nm) is absorbed in the layers close to the skin's surface
the near-infrared range (810–940 nm) penetrates deeper into the tissues
the blue range (460–480 nm) works on the skin's surface

The device is flicker-free, with an EMF emission of 0 μT.

Who is it recommended for, and from what age can it be used?

For those building a home wellness or recovery routine: athletes, people with active lifestyles, those supplementing their skincare routines, and anyone who wants to focus on their well-being.

Designed for adults. Teenagers should use it only under parental supervision and for shorter durations. For children, consult a pediatrician before use.

Consult your physician before use if you are under 18, pregnant, breastfeeding, or have any pre-existing medical conditions.

How to use it: at what distance, for how long, and how often?

Hold the panel 15–30 cm away from the area to be treated and direct the light straight onto the skin. Through clothing, the intensity of the light is significantly reduced.

Recommended duration: 10–20 minutes per area. Longer use does not yield stronger results.

Frequency: initially 3–5 times per week, later as a maintenance routine 2–3 times per week. Consistency is more important than intensity.

You operate the MAX 60 from a separate control panel (red and near-infrared light), without a built-in timer, so you must time it yourself.

When will I see a change, and how many sessions are needed?

The effect of PBM routines is gradual, not immediate. Most users report changes after several weeks of regular use.

in the first few weeks, the goal is to establish the routine
the routine is typically evaluated after 4–8 weeks
after that, a maintenance frequency is recommended

Individual reactions vary, and lifestyle (sleep, nutrition, exercise) also plays a role. If you stop using it, its effects will fade along with the routine, so it is advisable to continue at a maintenance pace.

Is it safe? Is eye protection required?

Red and near-infrared light is not UV light, so it does not tan the skin or cause sunburn.

However, eye protection is extremely important: do not look directly into the LEDs, and use protective goggles if the light is near your face.

Mild, temporary skin redness and a feeling of warmth may occur during use, which is normal. If the redness or discomfort does not go away, discontinue use and consult a doctor.

When is its use NOT recommended?

Do not use, and consult your physician beforehand if any of the following apply:

active malignant disease, or a mole or lesion in the area to be treated
photosensitivity, photosensitive epilepsy
taking medication that causes photosensitivity (e.g., certain antibiotics, isotretinoin, St. John's wort)
ophthalmic disease
treatment of the front of the neck in case of thyroid problems
infected or open wound in the area to be treated
implanted device or implant in the area to be treated
pregnancy or breastfeeding

The device is not a substitute for medical care. Always consult a professional in case of complaints.

What should I not combine it with, and can I use it over clothing?

In the same area and during the same period, we do not recommend:

using UV light devices or tanning beds
intensive exfoliating treatments (peels, strong acid treatments)
laser or IPL treatments
intensive heat treatments

It complements your skincare routine well: apply the light to clean, dry skin, and then apply your creams afterwards.

The intensity of the light is significantly reduced through clothing, so always direct it at clean, uncovered skin.

What is its performance, and what are the dimensions of the device?

LEDs: 60 x 5 W LEDs
power: 300 W
dimensions: 316 × 214 × 60 mm
noise level at 15 cm: 52 dB
cooling: 1 cooling fan
LED lifespan: approx. 100,000 hours
warranty: 2 years

How should I clean and store it?

Always switch off and unplug from the power supply before cleaning. Wipe the LED surface and the housing with a soft, slightly damp cloth. Do not use abrasive cleaners, alcohol, or solvents, and do not immerse in water.

Store in a cool, dry place, away from direct sunlight. Keep the ventilation openings clear to prevent the device from overheating.

If you notice any unusual noise, smell, or overheating during use, turn it off immediately, unplug it from the power supply, and contact our customer service.